Daco Label Rewinder
The Daco DTR-V platform has been developed as a
direct result of the need for a true 100%
inspection platform. The machine has been
developed with several of the leading 100%
inspection camera manufacturers, and close
consultation with customers. The machine rewinds
in both forward and reverse directions so that
re-inspection of the label is possible after a
fault is found by the camera system. Once a
fault is found the machine comes to a controlled
stop and the machine then reverses the fault
back to the splice table for correction. The
label is then passed back under the camera for
reinspection.
Many other systems do not have the ability to
re-inspect the defective label, as they do not
have the reverse feature. Once the roll is error
free the roll can then be slit if needed to the
desired width. The DTR-V integral counting
facility can count in either labels, feet or
metres |
